Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 535

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Lines and Trunks
Single Line Procedure
Console Display/Instructions
Specify entry mode.
! 
Select
Enter the line/trunk number for LS-ID Delay.
! 
Assign or remove the LS-ID Delay.
! 
Select
Return to the System Programming menu.
! 
Select twice.
Block Procedure
Console/Display Instructions
Specify the block of 20 lines associated with the 20 line buttons
! 
on the system programming console.
Select
Assign the LS-ID Delay to the appropriate lines/trunks.
! 
.
or
.
Additional Information
Dial or type:
Trunk number [ nnn ]
Slot and port number
Logical ID number
You may continue to assign or remove the LS-ID
delay from additional lines/trunks by repeating
Steps 2 and 3.
Additional Information
Toggle the green LED on or off as required.
On = assign the LS-ID Delay
Off = remove the LS-ID Delay
February 1998
Page 4-65
[ sspp ]
*
[ nnn ]
#
Issue 1
PC
È
Ã


ÇÇ
PC
à Ä
Å Æ