Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 502

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Lines and Trunks
Console/Display Instructions
Specify the type of trunks connected to the module.
! 
Enter the port numbers that have ground-start or loop-start trunks connected.
! 
400 and 408 ports: n = 1 to 4; 800 ports: n = 1 to 8.
Continue to assign trunk types or go to Step 8.
! 
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
Additional Information
= 400, 408, 408-MLX, or 800
modules
xx = slot number entered in Step 3
Select
and go to Step 6.
Or, select
and go to Step 9.
= option name selected in Step 5
xx = slot number entered in Step 3
NOTE:
If you get the Trunk Busy message,
wait for an idle condition or exit
system programming and try again
later.
Dial or type [ n ].
Return to Step 6. The next slot number
is displayed on Line 1.
February 1998
Page 4-32
or
or
Issue 1
PC
Ã
Ã
È
É
Ã


ÇÇ