Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 424

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 6.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3
Common Administrative Procedures
Night Service
Console/Display Instructions
Assign or remove the calling group(s) from the Night Service group.
! 
YYY
Return to the System Programming menu.
! 
Select
twice.
Night Service with Outward Restriction
Use this procedure to prevent unauthorized use of telephones after hours. This
feature requires the user to enter a password to make a call when Night Service is
activated, unless one of the lists below applies. It also requires an operator to
enter a password in order to activate Night Service manually.
To remove the password requirement follow the procedure below and delete the
current password (press the Drop button).
This procedure is also used to establish the following lists:
Emergency Allowed List. A list of telephone numbers that can be dialed
without a password.
Exclusion List. A list of extensions that are exempt from password
requirements.
A maximum of 10 telephone numbers can be included on the Emergency Allowed
List, each number with a maximum of 12 digits.
Extensions included in the Exclusion List keep normal call restrictions (if any are
assigned); however, they are not protected in any other way from unauthorized
use after hours.
AUDIX Voice Power jacks are automatically included on the Exclusion List.
Additional Information
YYYY
xxxx = number entered in Step 4
Select
remove your entry and continue adding or
removing calling groups from the Night
Service group by repeating Steps 1 and 2.
Select
assigning calling groups to the next Night
Service group (operator position).
to assign or
to save your entry and begin
3
Issue 1
February 1998
Page 3-246
PC


to
ÇÇ

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MERLIN LEGEND Release 6.0 and is the answer not in the manual?

Table of Contents