Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 366

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Optional Group Calling Features
Console/Display Instructions
Specify the type of login for the group that occurs after a power failure.
! 
Save your entry.
! 
Select
.
Return to the System Programming menu.
! 
Select three times.
Queue Control
In Release 6.0 and later systems, the system manager can control the maximum
number of calls allowed in the primary calling group queue for calls that arrive on
the following types of facilities:
DID (Direct Inward Dialing) and dial-in TIE
PRI facilities programmed for dial-plan routing
All calls transferred from a VMI (voice messaging interface) port
Internal calls to the DGC group
Internal calls to the calling group through the QCC Position-Busy backup
(PBB)
Intrasystem calls to the DGC group
All private network dialed calls, including remote DID
When the number of the calls in queue reaches the programmed maximum,
subsequent callers receive a busy signal.
NOTE: NOTE: NOTE:
Dial-in tie trunks, including private tandem tie trunks (Release 6.0 and later
systems, Hybrid/PBX only) cannot be assigned directly to calling groups.
YYYY
or
Additional Information
xxxx = number entered in Step 6
Press the button or function key next to
your selection.
Use to program the next calling group.
Return to Step 8.
3
Issue 1
February 1998
Page 3-188
PC
Ã


ÇÇÇ