Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 192

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
System Renumbering
Single Renumbering
Use this procedure to assign a specified extension number to a telephone,
accessory, line, pool (Hybrid/PBX only), calling group, paging group, or Listed
Directory Number. Single renumbering is also used for Remote Access, Park, Idle
Line Access (Key and Behind Switch only), and Automatic Route Selection
(Hybrid/PBX only).
! !
CAUTION: CAUTION:
Select (YJU on the console or
If you press Home , extensions may remain in the forced idle condition
(indicated when the LED next to each DSS button is on). To restore
extensions to their normal operating state, restart the system.
Summary: Single Renumbering
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Single Renumbering
Console Display/Instructions
Select the System Renumbering menu.
! 
Ç
on the PC after renumbering extensions.
System Manager
All
System idle
Form 2a, System Numbering: Extension Jacks
Form 2b, System Numbering: Digital Adjuncts
Form 2d, System Numbering: Special Renumbers
Not applicable
Old and new extension numbers
Yes
No
6\V5HQXPEHU 6LQJOH
Ä Ä
(QWHU
Dial new ext. no.
 Ç Ç
Select item
new ext. no.
Additional Information
3
3
Select item Dial old ext. no.
(QWHU ([LW ([LW
Type old ext. no.
3
Issue 1
February 1998
Page 3-14

Type
PC
Ä