Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 527

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Lines and Trunks
Single Line Procedure
Console/Display Instructions
Specify entry mode.
! 
Select
Enter the line or trunk with the specified queue priority.
! 
Assign or remove the line/trunk from the specified QCC priority level.
! 
Select or
Continue to assign or remove lines or trunks, or go to Step 5.
! 
Select .
Save your entry.
! 
Select .
Return to the System Programming menu.
! 
Select twice.
.
Y
.
Additional Information
Dial or type:
Trunk number [ nnn ]
Slot and port number [ sspp ]
Logical ID number
You may continue to assign or remove the QCC
priority level from additional lines/trunks by
repeating Steps 2 and 3.
Return to Step 2. The next QCC priority level is
displayed on Line 1.
February 1998
Page 4-57
[ nnn ]
#
Issue 1
PC
È
Ã




ÇÇ