Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 240

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
QCC Optional Features
Console Display/Instructions
Erase the current QCC operator backup number ( xxxx ).
! 
YYYY
7hpx†ƒhpr
@‘v‡
Specify the calling group to provide QCC operator backup.
! 
R88ÃPƒr…h‡‚…Ã7hpxˆƒ)
@‡r…ÃR88ƒr…h‡‚…
‚sÃ8hyyvtÃB…‚ˆƒ
7hpx†ƒhpr
@‘v‡
Assign or remove the group as QCC operator backup.
! 
Select @‡r… or
9ryr‡r .
Return to the System Programming menu.
! 
Select @‘v‡ two times.
Voice Announce
Use this procedure to enable or disable Voice Announce for the QCC. Voice
Announce is available only on a QCC in Release 4.0 and later.
When Voice Announce is enabled, every QCC in the system has one Voice
Announce Call button, the Call 5 (Ring/Voice) button. All Intercom calls that
originate from a QCC Call 5 (Ring/Voice) button are delivered as Voice Announce
calls.
When Voice Announce is disabled, all Intercom calls originating at the QCC Call
buttons are Intercom Ringing calls.
Additional Information
9ryr‡r
@‡r…
9ryr‡r
@‡r…
You may continue to assign or remove calling
groups as QCC operator backups by repeating
Steps 2 and 3.
Press Drop.
SP: "Entering an Extension"
3
Issue 1
February 1998
Page 3-62
PC
I
7/
Ã


ÇÇ