System Programming And Maintenance - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming And Maintenance Manual

MERLIN LEGEND Communications System Release 5.0 MERLIN LEGEND Communications System Release 5.0
System Programming and Maintenance (SPM) 555-650-140 System Programming and Maintenance (SPM)

System Programming and Maintenance

System Programming and
Maintenance
The System Programming and Maintenance (SPM) software package offers an
alternate method of programming the MERLIN LEGEND Communications
System using a PC. This method frees the system programming console for
other uses and also provides the additional functions listed below:
Backing up system programming information
Restoring system programming information from a backup
Converting system programming information from one release to another
(part of the upgrade procedure)
Upgrading the communications system to a newer release
Printing, viewing, and storing reports
Programming the communications system remotely
Programming in surrogate mode
SPM runs on a DOS-based PC as a standalone program or on a UNIX System
platform as part of Intuity, Integrated Solution II, or Integrated Solution III (IS
II/III). It is available on a 3.5-inch diskette for DOS or UNIX, or on a 5.25 inch
diskette for DOS.
NOTE:
SPM software can be used directly from the floppy disks on a DOS
machine; however, if your PC has a hard disk, you should install SPM
onto the hard disk.
Issue 1 Issue 1
June 1997 June 1997
Page 1