Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 306

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Optional Extension Features
Console Display/Instructions
Specify the sender's extension.
! 
Save your entry.
! 
Select @‡r… .
Erase the current number of rings ( xx ).
! 
Enter the number of rings before the call goes to Primary Coverage ( n = 1 to 6).
! 
Dial or type [ n ].
Save your entry.
! 
Select @‡r… .
Return to the System Programming menu.
! 
Select @‘v‡ twice.
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = trunk-to-trunk transfer is enabled.
Off = trunk-to-trunk transfer is disabled.
xxxx = number entered in Step 5
Press Drop.
Issue 1
February 1998
Page 3-128
PC

UG
I
Ã

ÇÇ