Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 187

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
3 Common Administrative Procedures
Basic System Operating Conditions
Console Display/Instructions
Enter six digits for the current date.
! 
Dial or type [ mmddyy ].
Save your entry.
! 
(QWHU
Select .
Return to the System Programming menu.
! 
([LW
Select 
Set System Time
The System Time feature allows you to set the time that appears on MLX display
telephones and on SMDR reports.
NOTES:
1. If you are planning to use the SMDR feature, make sure the system time
2. In Release 6.0 and later systems, where a MERLIN LEGEND
Summary: Set System Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
is set accurately. If you change the system time while the system is in
Night Service mode, Night Service is deactivated and must be manually
reactivated. If you have installed applications such as Call Management
System (CMS) or AUDIX Voice Power, you may need to set the time in
the applications software whenever you reset the system time.
Communications System is networked in a private network with one or
more other MERLIN LEGEND Communications Systems or with one or
more DEFINITY Communications Systems, SMDR reports may report
outgoing calls using more than one call record (especially for tandem
calls), depending upon how SMDR is programmed and how calls are
routed. Therefore, ensure that the system date and time are set
accurately on each system that carries these calls. When you examine
records for network calls, you may need to be aware of time zone
differences among different system locations.
System Manager
All
Not Required
Form 1, System Planning
0000
Additional Information
3
3
Issue 1
February 1998
Page 3-9
PC
Ã

Ç