Lucent Technologies MERLIN LEGEND Release 6.0 System Programming Manual page 529

MERLIN LEGEND Communications System Release 6.0
System Programming 555-660-111
4 Programming Procedures
Lines and Trunks
Summary: QCC Operator to Receive Calls
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To program a single line/trunk:
PC Procedure
Procedure: QCC Operator to Receive Calls
Console Display/Instructions
Select the Lines and Trunks menu.
! 
System Manager
Hybrid/PBX
Not required
Form 2c, System Numbering: Line/Trunk Jacks
No QCC operator is assigned to receive calls.
Extension number of first or fifth extension jack
Yes
No
More
Select entry mode
To program a block of lines/trunks:
More
Select block of lines/trunks
Æ  Æ
To program a single line/trunk:
Type ext. no.
Type line/trunk no.
Æ  Æ
To program a block of lines/trunks:
Type ext. no.
lines/trunks Toggle letter
Additional Information
4
Dial ext. no.
Dial line/trunk no.
Dial ext. no.
Toggle LED On/Off
 È
 Ç Ç

 Ç Ç
On/Off
4
Issue 1
February 1998
Page 4-59
Select block of
PC
Æ