System Renumbering - AT&T MERLIN LEGEND Release 4.0 Feature Reference

Feature Reference

System Renumbering

At a Glance
Users Affected
Reports Affected
Mode
Telephones
System Programming
Maximum
Factory Settings
Numbering Plan
ARS/Idle Line Access Code
Calling Groups
DSS Page 1 button
DSS Page 2 button
DSS Page 3 button
Extra Adjuncts
Extra Extensions
Listed Directory Number
MFMs/Terminal Adapters
Operator
Paging Groups
Park Zones
544
System Renumbering
Telephone users, operators
Automatic Route Selection
Dial Plan
Extension Directory
Extension Information
Group Paging
Operator Information
Remote Access (DISA) Information
All
All
Change the 2-digit numbering plan to 3-digit or Set Up
Space:
• SysRenumber
Default Numbering
2-Digit/3-Digit/Set-up Space
Renumber individual extensions or groups of extensions,
calling group extensions, Group Paging extension, pool dial-
out codes, system operator park zones, the Listed Directory
Number extension, the remote access code, the ARS access
code, or assign the range of extensions on a DSS:
• SysRenumber
Single
• SysRenumber
Block
Numbering Range: 0–9950
2-digit
9 (all numbering plans)
770–791 and 7920–7929 (all numbering plans)
starts with extension 0
starts with extension 50
starts with extension 100
6850–6992 (2-digit plan)
6700–6842 (2-digit plan)
800 (all numbering plans)
710–766 (2-digit plan)
300–499 (3-digit plan)
0 (not programmable)
793–799 (all numbering plans)
881–888 (system operator only)