AT&T MERLIN LEGEND Release 4.0 Feature Reference page 443

Feature Reference
Privacy is on automatically at data stations except modem only-data stations,
where Privacy can be activated as part of the dialing sequence.
Telephone Differences
Queued Call Consoles
A QCC operator cannot use Privacy.
Other Multiline Telephones
To turn on Privacy, press the programmed Privacy button (the green LED turns
on) or press the Feature button and dial
To turn off Privacy, press the programmed Privacy button (the green LED turns
off) or press the Feature button and dial
When an MLX display telephone user turns on Privacy, the display briefly shows
the message
3ULYDF\2II
display. When the user turns off Privacy, the display briefly shows the message
When an MLX-10 nondisplay or analog multiline telephone user (with or without
a display) turns Privacy on or off, there is no visual confirmation unless a Privacy
button is programmed on the telephone. If a Privacy button is programmed, its
green LED turns on and off with the Privacy feature.
Single-Line Telephones
To turn on Privacy before making or receiving a call, lift the handset and (while
listening to inside dial tone) dial

call is in progress, press and release the Recall or Flash button or switchhook
and dial
or switchhook again.
To turn off Privacy before making or receiving a call, lift the handset and (while
listening to inside dial tone) dial
 
call is in progress, press and release the Recall or Flash button or switchhook
and dial
button or switchhook again.
A single-line telephone user has no indication of whether Privacy is on or off.
3ULYDF\2Q
before returning to the Home screen or call-handling
.

. To return to the call, press and release the Recall or Flash button
 
. To return to the call, press and release the Recall or Flash

.

.

; then hang up. To turn on Privacy while a

; then hang up. To turn off Privacy while a
443
Privacy