AT&T MERLIN LEGEND Release 4.0 Feature Reference page 170

Feature Reference
Direct-Line Console
At a Glance
Users Affected
Reports Affected
Mode
Telephones
MLX
Analog Multiline
System Programming
Maximums
Operator positions (total
DLCs and QCCs)
DLCs for each module
MLX Display Labels
Factory Settings
Personal Lines
MLX DLC
Analog DLC
DLC Operator Automatic
Hold
Operator Hold Timer
One-Touch Transfer with
Automatic Completion
Primary System Operator
Position
Park Zone Extensions
170
Direct-Line Console
DLC operators only
System information (
Operator information
Extension information
All
MLX-20L, MLX-28D
BIS-22D, BIS-34, BIS-34D, MERLIN II System Display
Console
Assign or remove an individual DLC position:
•
Enable or disable DLC Operator Automatic Hold systemwide:
•
When One-Touch Transfer is programmed, select either
automatic or manual completion for system operators:
•
Change the duration of the timer signaling a call still on hold:
•
8
2
See "Display."
Lines 1–18
Lines 1–32
Disabled
60 sec (range 10–255 sec)
Enabled
First (lowest) jack on first MLX or analog extension module,
fixed
881–888
)