AT&T MERLIN LEGEND Release 4.0 Feature Reference page 308

Feature Reference
Screen Results
After the Application Switch Defaults screen, press 3 (
Maintenance menu returns.
Extension Directory Setup
When the technician selects
Maintenance menu during installation, IS III checks whether the system
Extension Directory already exists in the application database. If the directory
does not exist, IS III reads the switch extensions into the database, together with
the label for each extension, if there is one. If the directory does exist, the
technician has the following choices:
Exit without making any changes to the database, using 6 (
Reinstall the database. This choice completely replaces the existing
Extension Directory in the application database.
Reconcile the database with the switch. This choice follows the same rules
as the daily reconciliation program, as described earlier in Table 21.
System Programming Results
No information is sent to the switch.
Screen Results
The user is returned to the Technician Maintenance menu.
Extension Directory
Figure 21 shows the Extension Directory screen. A description of its use follows.
Extension. Enter an extension number in this field. To show information
available for that extension in the application database, press 1
(
Directory screen is first accessed after performing an Extension Directory
Setup, only the Extension Label field is filled in, assuming the extension is
a valid one and a label was programmed for it on the system.
Press 2 (
application database. If the extension still exists on the system, the
information is restored to the application database the next time the
reconciliation program runs.
If the user enters a non-valid extension (one that is not in the Extension
Directory), then when he or she finishes with this screen and presses 3
(
the extension is identified as a special-purpose extension. Since
Integrated Administration never adds extensions to the system, the
308
Integrated Administration
); the information fills the remaining fields. When the Extension
) to delete the information on the extension from the
), a request for confirmation appears. If the user confirms the entry,
); the Technician
from the Technician
).