AT&T MERLIN LEGEND Release 4.0 Feature Reference page 211

Feature Reference
Inspect Screens
The Inspect screen, illustrated in Figure 18 and Figure 19, appears when the
you press the Inspct button and then presses a line button. Two kinds of
information can appear:
If the button is associated with a call, calling information is displayed. If
you are already on a call and another call arrives, pressing Inspct and
the line button with the new call displays information about that call,
without interrupting the first call.
If the button is not associated with a call, the line or feature programmed
on the button is displayed, with the exception of Last Number Dial and
Saved Number Dial:
In Release 2.0 and later, inspecting a programmed Last Number Dial
or Saved Number Dial button displays the number stored on the
button if the button has been used, otherwise it displays the feature
name.
In Release 1.0 or Release 1.1, the Inspect screen shows the name of
the feature on the button.
To exit from the Inspect screen, press the Home, Feature, or Menu button.
Privacy
Home
Figure 18. 2-Line Display Inspect Screen for Programmed Button
INSPECT MODE
Menu Inspct
More
Display
211