AT&T MERLIN LEGEND Release 4.0 Feature Reference page 530

Feature Reference
Feature Interactions
Account Code Entry
Authorization Code
Auto Dial
Automatic Route
Selection
Basic Rate Interface
Callback and Call
Waiting
Caller ID
Camp-On
Conference
Coverage
530
Station Message Detail Recording (SMDR)
The account code is printed in the ACCOUNT field of the SMDR record.
If SMDR is set to record outgoing calls only, an account code cannot be
entered on incoming calls. If a remote access barrier code is entered
for an incoming call and then an account code is entered, the account
code only (not the barrier code ID) appears on the report.
All outgoing calls over the minimum call length made using an
authorization code are recorded in the SMDR record.
If an account code is not entered, the ACCOUNT field of the SMDR
report contains the authorization code used to obtain calling privileges.
If an account code is entered at any time during a call, the account
code is stored in the SMDR record.
All calls made to an outside number using Auto Dial are recorded on the
SMDR report.
The CALLED NUMBER field of SMDR reports for systems with Automatic
Route Selection (ARS) shows all the digits dialed by the user, including
any digits absorbed by the system and the facility used to make the
call. The records do not include the ARS dial-out code or any digits
added by ARS.
The number of a BRI line is shown in the LINE field of the SMDR report.
Call timing begins when the call is answered. Therefore, calls that are
not answered do not have an SMDR call record generated.
See Appendix F for print reports showing the actual SMDR fields.
SMDR begins measuring the duration of callback calls when the trunk is
seized and the system begins dialing the call. Call-waiting calls are
measured as soon as the call is answered.
Calling party numbers (if available) for incoming calls (including remote
access calls) that are received on a facility with Caller ID are recorded
in the SMDR report only if the SMDR report is set for ISDN format.
If an incoming call is camped on but is not picked up by the other
extension, the extension of the user that activated Camp-On is shown in
the STN field of the SMDR report. If an incoming call is camped on and
picked up by the destination extension, the destination extension is
shown in the STN field of the SMDR report.
When a conference call includes inside and outside participants,
records are generated only for outside participants. When a call is
dropped from a conference call, it is considered a completed call and
is sent to the SMDR print queue.
The extension of the telephone on which an Individual or Group
Coverage call is answered is shown on the SMDR report.