Toll Type - AT&T MERLIN LEGEND Release 4.0 Feature Reference

Feature Reference

Toll Type

At a Glance
Users Affected
Reports Affected
Mode
Telephone
System Programming
Factory Setting
Description
The Toll Type setting allows the system to classify calls as either local or toll,
based on the number a user dials. The factory setting for Toll Type requires the
user to dial a toll prefix (
number for a toll call. In some areas, a toll prefix is not necessary. The factory
setting for Toll Type can be changed to specify that no toll prefix is required for
these types of trunks.
Dialing a prefix depends on local telephone company requirements and the
type of trunk being used.
Considerations and Constraints
Toll Type does not apply to tie trunks or Direct Inward Dialing (DID) trunks. The
local telephone company must be consulted to determine which of the system's
trunks require a toll prefix.
Mode Differences
Hybrid/PBX
Systems in Hybrid/PBX mode with Automatic Route Selection (ARS) always
require the user to dial
may require dialing
Telephone users, operators
General Trunk Information
All
All
/LQHV7UXQNV 7ROO7\SH
Designate whether or not a toll prefix is required:
•
Toll prefix required


or ) before dialing the area code and telephone


before dialing a 10-digit toll call. Some 7-digit numbers
as well.
557
Toll Type