AT&T MERLIN LEGEND Release 4.0 Feature Reference page 224

Feature Reference
Feature Description
Inspect An MLX telephone user can
inspect the contents of pro-
grammed buttons by pressing
the Inspct button and then
pressing the programmed
button. In most cases, the
display shows the feature or
line assigned to the button. (In
Release 2.0 and later,
inspecting a Last Number Dial
or Saved Number Dial button
shows the number stored on
the button.)
Users can also inspect incom-
ing calls or their calls on hold.
The display shows standard
call information (see
"Receiving Calls," in this
table).
If a user inspects a line that
someone else is using, the
display shows that the line is
in use.
Last Number When a user presses a
Dial programmed Last Number
Dial button, the user sees
digits on the display as if
dialing them from the dialpad.
In Release 2.0 and later,
inspecting a Last Number Dial
button shows the number
stored on the button.
Messaging When a user sends a
message to another tele-
phone, the display shows a
feedback message.
When a user tries to retrieve
messages and the message
box is empty, the display
indicates that there are no
messages.
224
Display
Sample Displays
Analog Multiline
No display
No display
No display
No display
MLX
( outside )
( inside )