AT&T MERLIN LEGEND Release 4.0 Feature Reference page 522

Feature Reference
Queued Call Consoles
Personal Speed Dial and System Speed Dial cannot be used to dial numbers on
a QCC. Directory features can be used instead.
Other Multiline Telephones
System Speed Dial
To dial a System Speed Dial number, press a System Speed Dial button
programmed with the code. Alternatively, lift the handset, press the Feature
button, and dial the System Speed Dial code associated with the number.
Analog multiline telephone users without programmed Feature buttons should
select an SA or ICOM button, lift the handset, and dial the System Speed Dial
code.
Personal Speed Dial
Users of multiline telephones with more than 10 buttons should not use Personal
Speed Dial; doing so may delete features already programmed onto buttons. To
dial a Personal Speed Dial number on a multiline telephone, press the Feature
button and dial the Personal Speed Dial code (01–24) associated with the
number. While off-hook or on an SA or ICOM button at an analog multiline
telephone without a programmed Feature button, dial
Speed Dial Code.
Starting with Release 1.1, MLX-10D telephone users, when programming
Personal Speed Dial numbers, must select
the telephone number.
Single-Line Telephones
To dial a Personal Speed Dial or System Speed Dial number using a single-line
telephone, lift the handset and (while listening to inside dial tone), and then dial
and the Speed Dial code.
#
Feature Interactions
Account Code Entry
Allowed Lists
522
Speed Dial
A System Speed Dial number or a Personal Speed Dial number can be
programmed to replace a long account number, but it cannot be
programmed to contain both an account number and a telephone
number. Single-line telephones cannot use Personal Speed Dial or
System Speed Dial to dial account codes because the # required to use
Speed Dial is also used to terminate Account Code Entry.
A user with an outward-restricted or toll-restricted telephone cannot dial
an outside number by using a Personal Speed Dial or System Speed
Dial code (excluding a marked System Speed Dial code), unless the
number is on an Allowed List assigned to the extension.
and the Personal
#
from the display after dialing
Enter