AT&T MERLIN LEGEND Release 4.0 Feature Reference page 312

Feature Reference
System Programming Results
The following information is sent to the system:
Add extension(s) to or delete from AUDIX Voice Power coverage group
(30), depending on selection in Add User to AUDIX Voice Power cover
group field.
Add Auto Dial button for Automated Attendant calling group (770).
Add private fax extension(s) to or delete from AUDIX Voice Power
coverage group.
Screen Results
When finished using AUDIX Voice Power User or AUDIX Voice Power/FAX
Attendant User screen, press 3 (
AUDIX Voice Power or for AUDIX Voice Power/FAX Attendant. Subscriber
screens are for programming application parameters and do not send any
information to the switch.
Access the Subscriber screens by selecting
the AUDIX Voice Power or AUDIX Voice Power/FAX Attendant menu under the
Integrated Solution III or Integrated Solution Maintenance menu. This method
allows information about an existing subscriber to be changed but does not
allow the addition of a new subscriber.
System Programming/Switch Admin
On initial installation of IS III , selecting
the AUDIX Voice Power or AUDIX Voice Power/FAX Attendant menu brings up
the System Programming/Switch Admin Form screen. Figure 23 shows this
screen, and a description of its use follows.
On subsequent access , the System Programming/Switch Admin selection
brings up the System Programming/Switch Admin Menu screen. Figure 24
shows this menu, both as it appears with only AUDIX Voice Power installed and
as it appears with both AUDIX Voice Power and FAX Attendant installed.
Note that one of the selections on the System Programming/Switch Admin menu
(Figure 24) is System Programming/Switch Admin Form, which brings up the
System Programming/Switch Admin Form screen (Figure 23).
312
Integrated Administration
). The Subscriber screen appears for
from
from