System Renumbering - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

System Renumbering

The procedures in this section are used to assign the 2-digit, 3-digit, and Set
Up Space numbering plans.
NOTE:
System Renumbering is called Flexible Numbering in the MERLIN® II
Communications System. This is not the same as Board Renumbering, an
option used when modules in the control unit are changed.
Do not attempt to assign a numbering plan without Planning Forms 2a,
System Numbering: Extension Jacks; 2b, System Numbering: Digital
Adjuncts; and 2d, System Numbering: Special Renumbers. Form 6a, Optional
Operator Features, is needed to assign a DSS Page button.
This section contains the following programming procedures:
Select System Numbering Plan
Single Renumbering
Block Renumbering
Direct Station Selector (DSS) Page Button Assignment
3
System Renumbering 3-1