AT&T MERLIN LEGEND Release 4.0 Feature Reference page 532

Feature Reference
Remote Access
Saved Number Dial
Speed Dial
System
Access/Intercom
Buttons
Transfer
532
Station Message Detail Recording (SMDR)
Remote access calls are recorded only if SMDR is programmed to track
incoming calls. If a barrier code is entered, the barrier code number
(01–16) appears in the ACCOUNT field of the report, preceded by
. If the caller uses Remote Access to dial an extension and the
999999
call is answered, the extension number is shown in the STN (station)
field. If the call is not answered at the extension, the STN field is blank.
If no barrier code is required, the ACCOUNT field contains
Beginning with Release 3.0, if the caller provides an invalid or
incomplete barrier code for three attempts, either
are recorded in the ACCOUNT field. If the connection is broken before
the third attempt, the ACCOUNT field contains
hangs up after the third attempt, but before receiving reorder tone, the
ACCOUNT field may contain either
hangs up after the third attempt and after receiving reorder tone, the
ACCOUNT field contains 16 zeros.
If the caller uses Remote Access to dial out on a line or trunk, the STN
field is blank on the first SMDR record and a second record is
generated for the outgoing call.
All calls made to outside numbers using Saved Number Dial are
recorded on the SMDR report.
When Personal Speed Dial or System Speed Dial is used to dial an
outgoing call, the actual digits dialed by the system appear on the
report. However, when a marked System Speed Dial number is used,
the System Speed Dial code prints rather than the digits dialed.
When a call is made on a Shared SA button, the SMDR report records
the extension number that the call was made from, not the principal
extension number.
The number of the extension that hangs up on an incoming outside call
is shown in the STN field of the SMDR report, regardless of how many
times the call is transferred. For outgoing outside calls, the number of
the extension that dialed the call is shown on the SMDR report, even if
the call is later transferred to another extension.
999999
. If the caller
999999
or 16 zeros. If the caller
999999
.
99999900
or 16 zeros