AT&T MERLIN LEGEND Release 4.0 Feature Reference page 200

Feature Reference
MLX-20L Telephones
While a Personal Directory on an MLX-20L telephone is being programmed, the
user cannot receive calls (the caller hears a busy signal) but can still hear the
telephone ringing. In Release 1.0, ringing is normal. In Release 1.1 and later,
ringing occurs at 20-second intervals.
To use the System or Extension Directory feature on an MLX-20L telephone,
press the Menu button, then select
either type of directory from the display. Next, select a range of letters from
which to begin the search. The display shows the first seven listings that begin
with the first letter in the range.
To scroll through the listings, select
shown) or
To display the telephone number associated with an individual listing, select
next to the listing. To exit the Show Number function, select
(the highlight is removed from
shown on the display, press the button next to the listing.
To use the Personal Directory on an MLX-20L telephone, press the Home
button; a QCC operator selects
have been programmed to appear on the Home screen, the first eight listings
(six listings for a QCC operator) are shown. To see the second eight listings (six
listings for a QCC operator), select
range of letters, select
same procedure to search for listings as is used in System and Extension
Directories. To dial a number for a listing shown on the display, press the button
next to the listing.
NOTES:
1. The telephone number for a marked Personal Directory listing is
displayed when you choose
Directory listing is a listing that has been specifically designated
during programming to suppress the telephone number from the
display when the number is dialed from the display.
2. Marked System Speed Dial entries (entries that do not display) are not
affected by the Second Dial Tone setting. If the central office does not
immediately supply dial tone when a star code is entered and a
marked System Speed Dial entry uses star codes, then the
appropriate number of pauses (each 1.5 seconds) must be
programmed in the entry following each star code.
200
Directories
(the previous seven entries are shown) from the display.
from the display (
from the Home display two times. Use the
from the display, then select
(the next seven entries are
is highlighted) and press the button
). To dial a number for a listing
from the Home screen. If listings
. To select listings by using a
. A marked Personal
again