AT&T MERLIN LEGEND Release 4.0 Feature Reference page 77

Feature Reference
Saved Number Dial
SMDR
Speed Dial
System
Access/Intercom
Buttons
System Numbering
Toll Type
The ARS dial-out code is saved with the telephone number dialed.
SMDR reports for systems with ARS show all the digits dialed by the
user in the CALLED NUMBER field, including any absorbed (ignored)
digits, and the facility used to make the call. The reports do not include
the ARS dial-out code or any digits added by ARS.
Personal Speed Dial and System Speed Dial numbers can include the
ARS code.
The ARS FRL assigned to the telephone being used to make the call
applies to calls made on both SA and Shared SA buttons.
The ARS access code can be renumbered (factory setting is 9).
In certain areas, the local telephone company requires the prefix 1 for
certain exchanges. In these cases, the exchanges can be assigned to a
1 + 7 Table; the 1 + 7 Dialing Requirements must be set to Within Area
Code so that people calling numbers in other exchanges do not have to
dial .
Automatic Route Selection
77