AT&T MERLIN LEGEND Release 4.0 Feature Reference page 302

Feature Reference
4. Select
following:
5. Select
or AUDIX Voice Power/FAX Attendant menu, and program any of the
services below, as applicable.
NOTE:
During initial Integrated Administration programming for an existing
system, do not assign any lines or pools to the calling groups set up for
services. Otherwise, the lines begin ringing into the service before
greetings or other service-specific options are programmed. Go on to
Step 6 and finish programming the application; then return to Step 5
through the System Programming/Switch Admin menu and add lines and
pools.
On first use of Integrated Administration, the user automatically steps
through each of these services:
On subsequent uses of Integrated Administration, select
Power/FAX Attendant menu, then select
the list above.
6. Program any application options that are not system-related (such as
Outcalling and voice menus and prompts) through the AUDIX Voice
Power or AUDIX Voice Power/FAX Attendant menu.
7. On installation of both the system and IS III, exit from IS III, then perform
all remaining system programming that is not application-related, using
SPM or the programming console.
302
Integrated Administration
Assignment of extensions as AUDIX Voice Power subscribers (if
FAX Attendant is installed, this step also assigns the extensions as
FAX Attendant subscribers)
Assignment of special-purpose extensions
Labeling of extensions
Automated Attendant (Immediate, Delayed, or Night Service call
handling and lines and pools)
Call Answer (lines and pools)
Information Service (lines and pools)
Message Drop (lines and pools)
Voice Mail (lines and pools)
FAX Response (lines and pools)
from the AUDIX Voice Power or AUDIX Voice
. Finally, select the specific service to be programmed from
and on the resulting screens, program the
from the AUDIX Voice Power