AT&T MERLIN LEGEND Release 4.0 Feature Reference page 254

Feature Reference
If off hook on an SA or ICOM button, you hear confirmation tone, and then dial
tone is removed.
Single-Line Telephones
At a single-line telephone, turn on forwarding to an extension by lifting the
handset, which must connect to an SA or ICOM line, and dialing
destination extension number. You hear a confirmation tone (double break in
dial tone), and dial tone is removed.
To forward calls to an outside telephone number, lift the handset (the telephone
must connect to an SA or ICOM line), and dial
trunk or pool on which to route forwarded calls by dialing the ARS or pool
dial-out code (Hybrid/PBX mode only), the Idle Line Access code (usually
Key and Behind Switch modes only), or the trunk number (usually 801–880).
Then dial the destination telephone number followed by a pound sign ( ) to
signal the end of the dialing sequence. You hear a confirmation tone and dial
tone is removed.
To turn on Follow Me, lift the handset (the telephone must connect to an SA or
ICOM line), and dial
and dial tone is removed.
To cancel Forward, Remote Call Forward, and Follow Me at the originating
single-line telephone, lift the handset (the telephone must connect to an SA or
ICOM line), and dial
"forwarding" calls to that extension). You hear a confirmation tone and dial tone
is removed.
At a destination single-line telephone, cancel Forward and Follow Me from other
extensions by lifting the handset (the telephone must connect to an SA or ICOM
line), and dialing
To cancel forwarding from one extension, dial that extension.
To cancel forwarding from all extensions, dial .
If off hook on an SA or ICOM button, the user hears confirmation tone and then
dial tone is removed.
Calls are forwarded to single-line telephone extensions even if there is no
telephone or other tip/ring device connected to that port.
Feature Interactions
Account Code Entry
254
Forward and Follow Me
and your own extension. You hear a confirmation tone
and your own extension number (in effect,
; then one of the following:

You cannot enter account codes for calls forwarded to outside
telephone numbers. Account codes are not necessary for calls
forwarded to extensions.
and the
. Then select the outside
;