AT&T MERLIN LEGEND Release 4.0 Feature Reference page 257

Feature Reference
Direct Station
Selector
Direct Voice Mail
Disallowed Lists
Display
Forward can be turned on by pressing a programmed Forward button
or using the feature code, then pressing a DSS button corresponding to
the destination extension. Follow Me can be turned on by using the
feature code and pressing a DSS button corresponding to the
forwarding extension. In Release 2.1 and later, when a call is forwarded
to a multiline telephone that has a DSS or Auto Dial button for the
forwarding telephone, the red LEDs next to the DSS buttons or green
LEDs next to Auto Dial buttons associated with the caller and the
forwarding telephone on the forwarded-to telephone's DSS do not flash.
In Release 4.0, if Forwarding is active and Delayed Forwarding is not
set to 0 rings, pressing the Direct Voice Mail button at the forwarding
extension while a call is ringing on a button causes the call to go
directly to voice mail coverage and does not get forwarded.
In Release 3.0 and later, a call that is made or transferred to an
extension using Direct Voice Mail is not forwarded or remote call
forwarded.
A user with an outward- or toll-restricted telephone cannot forward calls
to an outside number if the number is on a Disallowed List assigned to
the restricted extension. No error tone sounds when a user with a
restricted telephone uses Remote Call Forward. However, when a call
eligible for forwarding is received, the system checks restrictions and
denies the forward if the outside telephone number is on the Disallowed
List assigned to the restricted extension.
When an MLX display telephone user forwards calls to an extension, the
display prompts for the extension. After Forward is turned on, the user
sees a confirmation message. A user receiving a forwarded call sees a
message indicating which extension forwarded the call. For an outside
call, pressing More displays the line the call came in on and, if
Automatic Number Identification (ANI) or Caller ID is available, the
caller's number. For an inside call, pressing More shows the caller's
name and extension.
When an MLX display telephone user forwards calls to an outside
telephone number, the display prompts for the number. On MLX and
analog multiline telephones, the digits appear on the display as the user
dials the number. An MLX display telephone user receives a feedback
message confirming that his or her calls are now forwarded to an
outside number.
Forward and Follow Me
257