Integrated Administration - AT&T MERLIN LEGEND Release 4.0 Feature Reference

Feature Reference

Integrated Administration

At a Glance
Users Affected
Reports Affected
Mode
Telephones
Factory Settings
Automated Attendant Calling
Group
Call Answer Calling Group
Fax Response Calling Group
Information Service Calling Group
Message Drop Calling Group
Voice Mail Calling Group
Coverage Group
Reliable Disconnect
Delay Ring
Coverage Delay Ring
VMS Transfer Return Interval
Transfer Return Time
NOTE:
Integrated Administration is available with Release 2.0 and later.
Description
The Integrated Administration capability of Integrated Solution III (IS III)
simplifies the programming of common information for the system, AUDIX Voice
Power, and, if it is also installed, AT&T FAX Attendant System . Since the
AUDIX Voice Power and FAX Attendant applications use some of the same
information programmed on the system, Integrated Administration lets the
installer or system manager make changes or additions to this information just
once, instead of in both applications and the system itself. Using Integrated
Administration reduces programming time and effort and ensures that the
system and the applications are in agreement.
NOTE:
Integrated Administration uses the word switch to refer to the communications
system (what we call the system in this book).
System manager, installer
Direct Group Calling Information
Group Coverage Information
GS/LS Trunk Information
System Information
Key and Hybrid/PBX
All
770
7926
7924
7927
7928
7925
30 (range 1–30)
Yes
2 rings (range 1–6 rings)
3 rings (range 1–9 rings)
6 rings (range 0–9 rings)
6 rings (range 0–9 rings)
Integrated Administration
297