AT&T MERLIN LEGEND Release 4.0 Feature Reference page 399

Feature Reference
Pools
At a Glance
Users Affected
Reports Affected
Mode
Telephones
System Programming
Maximums
Pools for each system
Trunks for each pool
Buttons assigned for each
pool
Factory Settings
Main Pool
Ground-Start Trunk Pool
Dial-In Tie Trunk
Automatic-In Tie Trunk
Pool Dial-Out Code
Restrictions
Description
Hybrid/PBX mode allows outside trunks to be grouped together in pools. Users
select trunks by using SA buttons instead of having a separate button for each
trunk in the system. To access pools by using an SA button, users dial pool
dial-out codes. Pools can also be assigned to buttons on one or more
telephones to allow the user to select the pool without dialing the pool dial-out
code or Automatic Route Selection (ARS) access code. In Release 3.1 and later
systems, the factory setting is for no users to be able to use any pool dial-out
codes. To use pool dial out codes, users must be given access to each pool
dial-out code through system programming by the system manager.
Telephone users, operators
Dial Plan
Hybrid/PBX only
All
Assign individual trunks to pools:
•
Assign Pool buttons to telephones:
•
Restrict telephone from using pool dial-out code:
•
11
Unlimited
64
70
890
891
892
No access to any pool
399
Pools