Command Logger Configuration; Console Log Configuration; Figure 32: Command Logger Configuration; Table 24: Command Logger Configuration Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
This log message has a severity level of 7 (15 mod 8), which is a debug message. The message was generated by the MSTP
component running in thread id 2110. The message was generated on August 24 05:34:05 by line 318 of file mstp_api.c.
th
This is the 237 message logged with system IP 0.0.0.0 and unit number 1.
• Click Refresh to update the page with the latest messages.
C L
OMMAND OGGER
Use the Command Logger Configuration page to enable the system to log all CLI commands issued on the system. The
command log messages are interleaved with the other system logs messages.
To access the Command Logger Configuration page, click LAN > Administration > Log > Command Logger
Configuration in the navigation menu.
Field
Admin Mode
• If you change the administrative mode, click Submit to apply the change to the system.
C L C
ONSOLE OG ONFIGURATION
Use the Console Log Configuration page to control logging to any serial device attached to the switch.
To access the Console Log Configuration page, click LAN > Administration > Log > Console Log Configuration in the
navigation menu.
Page 86 Managing Logs
C
ONFIGURATION

Figure 32: Command Logger Configuration

Table 24: Command Logger Configuration Fields

Description
This field determines whether to log CLI commands in the system log file.
• Enable: The system logs CLI commands. The commands appear in messages on the
Buffered Log page. For example, the following log messages shows when the CLI
command show logging buffered was issued, from which IP address the
command was issued, and the name of the user who issued the command:
<5> NOV 29 22:25:00 10.254.24.172-1 UNKN[243420816]:
cmd_logger_api.c(87) 34 %% CLI:10.254.24.65:admin:show
logging buffered
• Disable: This system does not log CLI commands.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09