D-Link Unified Access System
R
P
OUTE
REFERENCES
Use the Route Preferences Configuration page to configure the default preference for each protocol. These values are
arbitrary values that range from 1 to 255, and are independent of route metrics. Most routing protocols use a route metric to
determine the shortest path known to the protocol, independent of any other protocol. Routes with a preference of 255 are
not used for forwarding.
The best route to a destination is chosen by selecting the route with the lowest preference value. When there are multiple
routes to a destination, the preference values are used to determine the preferred route.
To display the page, click LAN > L3 Features > Router > Route Preferences Configuration in the navigation tree.
Field
Local
Static
RIP
BGP4
•
If you make changes to the page, click Submit to apply the changes to the system.
Page 308
Router
C
ONFIGURATION
Figure 214: Route Preferences Configuration
Table 193: Route Preferences Configuration Fields
Description
This field displays the local route preference value of 0. This value is not configurable.
The static route preference value in the router. The default value is 1. The range is 1
to 255.
The RIP route preference value in the router. The default value is 15. The range is 1
to 255.
The BGP4 route preference. The default value is 0. The range is 1 to 255.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09