Time Zone Configuration; Table 36: Global Status Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field
Version
Supported Mode
Last Update Time
Last Attempt Time
Last Attempt Status
Server IP Address
Address Type
Server Stratum
Reference Clock Id
Server Mode
Unicast Sever Max Entries
Unicast Server Current Entries Specifies the number of current valid unicast server entries configured for this client.
Broadcast Count
• Click Refresh to display the latest information from the router.
T Z C
IME ONE ONFIGURATION
Use the Time Zone Configuration page to configure the time zone difference from Coordinated Universal Time (UTC).
To display the Time Zone Configuration page, click LAN > Administration > SNTP > Time Zone Configuration in the
navigation menu.
Document 34CSFP6XXUWS-SWUM100-D7

Table 36: Global Status Fields

Description
Specifies the SNTP Version the client supports.
Specifies the SNTP modes the client supports. Multiple modes may be supported by
a client.
Specifies the local date and time (UTC) the SNTP client last updated the system clock.
Specifies the local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.
Specifies the status of the last SNTP request or unsolicited message for both unicast
and broadcast modes. If no message has been received from a server, a status of
Other is displayed. These values are appropriate for all operational modes:
• Other: None of the following enumeration values.
• Success: The SNTP operation was successful and the system time was updated.
• Request Timed Out: A directed SNTP request timed out without receiving a
response from the SNTP server.
• Bad Date Encoded: The time provided by the SNTP server is not valid.
• Version Not Supported: The SNTP version supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized: The SNTP server is not synchronized with its peers. This
is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of Death: The SNTP server indicated that no further queries were to be
sent to this server. This is indicated by a stratum field equal to 0 in a message
received from a server.
Specifies the IP address of the server for the last received valid packet. If no message
has been received from any server, an empty string is shown.
Specifies the address type of the SNTP Server address for the last received valid
packet.
Specifies the claimed stratum of the server for the last received valid packet.
Specifies the reference clock identifier of the server for the last received valid packet.
Specifies the mode of the server for the last received valid packet.
Specifies the maximum number of unicast server entries that can be configured on this
client.
Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.
D-Link Unified Access System
Configuring SNTP Settings Page 101