Double Vlan Tunneling Summary; Figure 58: Double Vlan Tunneling; Table 48: Double Vlan Tunneling Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
Field
Slot/Port
Mode
EtherType
• If you make any changes to the page, click Submit to apply the changes to the system.
D VLAN T
OUBLE UNNELING
The Double VLAN Tunneling Summary page shows the double VLAN tunneling configuration status for all ports on the
system.
To access the Double VLAN Tunneling Summary page, click LAN > Monitoring > VLAN Summary > Double VLAN Status
in the navigation tree.
Page 118 Multiple Port Mirroring

Figure 58: Double VLAN Tunneling

Table 48: Double VLAN Tunneling Fields

Description
Select the physical interface for which you want to display or configure data. Select All
to set the parameters for all ports to same values. For non-stacking platforms, the field
name is Slot/Port.
This specifies the administrative mode for Double VLAN Tagging:
• Enable: Double VLAN Tagging is enabled for the specified port (or All ports).
• Disable: Double VLAN Tagging is disabled for the specified port (or All ports), which
is the default value.
The two-byte hex EtherType to be used as the first 16 bits of the Double VLAN tag:
• 802.1Q Tag: Commonly used tag representing 0x8100
• vMAN Tag: Commonly used tag representing 0x88A8
• Custom Tag: If you select this EtherType option, the screen refreshes, and the
Custom Value field appears.
• Custom Value: Enter a custom EtherType value in any range from (0 to 65535).
S
UMMARY
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09