D-Link Unified Access System
Field
IP Address
Vendor ID
Software Version
Protocol Version
Discovery Reason
Managed AP Count
Age
Viewing Peer Switch Configuration Status
You can push portions of the switch configuration from one switch to another switch in the cluster. The Peer Switch
Configuration Status page displays information about the configuration sent by a peer switch in the cluster. It also identifies
the IP address of each peer switch that received the configuration information.
To view information about the configuration received by the local switch, go to the WLAN > Monitoring >
Global page and click the Configuration Received tab.
Table 310
describes the fields available on the Peer Switch Status page.
Page 486
Monitoring Status and Statistics
Figure 333: Peer Switch Status
Table 309: Peer Switch Status
Description
IP address of the peer wireless switch in the cluster.
Vendor ID of the peer switch software.
The software version for the given peer switch.
Indicates the protocol version supported by the software on the peer switch.
The discovery method of the given peer switch, which can be through an L2 Poll or IP Poll
Shows the number of APs that the switch currently manages.
Time since last communication with the switch in Hours, Minutes, and Seconds.
Figure 334: Peer Switch Configuration Status
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09