D-Link Unified Access System
VRRP Interface Tracking
Use the VRRP Interface Tracking page to add an interface to the tracking list.
Field
Slot/Port
Virtual Router ID
Track Slot/Port
Priority Decrement
•
Click Submit to send the updated configuration to the switch. Configuration changes take effect immediately. These
changes will not be retained across a power cycle unless a Save configuration is performed.
•
Click Cancel to return to the VRRP Interface Tracking Configuration page.
VRRP Route Tracking Configuration
Use VRRP Route Tracking Configuration to track specific route IP states within the router that can alter the priority level of
a virtual router for a VRRP group.
To display the page, click LAN > L3 Features > VRRP > Virtual Router Configuration in the navigation tree, then click the
Track Route button.
Page 316
Virtual Router Redundancy Protocol (VRRP)
Figure 220: VRRP Interface Tracking
Table 199: VRRP Track Interface Fields
Description
The interface associated with the Virtual Router ID.
The Virtual Router ID for which data is to be displayed.
Displays all routing interfaces which are not yet tracked for this Virtual Router ID and
interface configuration. Exceptions to this: loopback and tunnels could not be tracked.
The priority decrement for the tracked interface. The valid range is 1-254. The default
value is 10.
Figure 221: VRRP Route Tracking Configuration
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09