Virtual Router Configuration; Figure 218: Virtual Router Configuration; Table 197: Virtual Router Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
V R C
IRTUAL OUTER
Use the Virtual Router Configuration page to create a new virtual router or to configure an existing one.
To display the page, click LAN > L3 Features > VRRP > Virtual Router Configuration in the navigation tree.
Field
VRID and Slot/Port
VRID
Slot/Port
Pre-empt Mode
Configured Priority
Priority
Advertisement Interval (secs)
Interface IP Address
Document 34CSFP6XXUWS-SWUM100-D7
ONFIGURATION

Figure 218: Virtual Router Configuration

Table 197: Virtual Router Configuration Fields

Description
Select Create from the menu to configure a new Virtual Router, or select one of the
existing Virtual Routers, listed by interface number and VRID.
This field is only configurable if you are creating new Virtual Router, in which case
enter the VRID in the range 1 to 255.
This field is only configurable if you are creating new Virtual Router, in which case
select the interface for the new Virtual Router from the menu.
Select Enable or Disable from the dropdown menu. If you select Enable, a backup
router preempts the master router if it has a priority greater than the master virtual
router's priority, provided that the master is not the owner of the virtual router's IP
address. The default is Enable.
Enter the priority value to be used by the VRRP router in the election for the master
virtual router. If the Virtual IP Address is the same as the interface IP Address, the
priority gets set to 255 no matter what you enter. If you enter a priority of 255 when the
Virtual and interface IP Addresses are not the same, the priority gets set to the default
value of 100.
The operational priority of the VRRP router. This is relative to the configured priority.
The operational priority depends upon the configured priority, and the priority
decrements configured through the tracking process.
Enter the time, in seconds, between the transmission of advertisement packets by this
virtual router. Enter a number between 1 and 255. The default value is 1 second.
Indicates the IP Address associated with the selected interface.
D-Link Unified Access System
Virtual Router Redundancy Protocol (VRRP) Page 313