Switch Configuration/Status; Figure 167: Spanning Tree Switch Configuration/Status; Table 150: Spanning Tree Switch Configuration/Status Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
S C
WITCH ONFIGURATION
The Spanning Tree Switch Configuration/Status page contains fields for enabling STP on the switch.
To display the Spanning Tree Switch Configuration/Status page, click LAN > L2 Features > Spanning Tree > Switch
Configuration in the navigation tree.
Field
Spanning Tree Admin Mode
Force Protocol Version
Configuration Name
Configuration Revision Level
Configuration Digest Key
MST ID
VID
FID
• If you make any configuration changes, click Submit to apply the new settings to the switch.
• Click Refresh to update the information on the screen with the most current data.
Document 34CSFP6XXUWS-SWUM100-D7
/S
TATUS

Figure 167: Spanning Tree Switch Configuration/Status

Table 150: Spanning Tree Switch Configuration/Status Fields

Description
Enables or disables STP on the switch.
Specifies the Force Protocol Version parameter for the switch:
• IEEE 802.1D: Spanning Tree Protocol (STP)
• IEEE 802.1w: Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)
Name used to identify the configuration currently being used. It may be up to 32
alphanumeric characters.
Number used to identify the configuration currently being used. The values allowed are
between 0 and 65535. The default value is 0.
Number used to identify the configuration currently being used. The digest key is
generated based on the association of VLANs to different instances. To ensure the
digest key is same on two different switches, the mapping of VLAN-to-instance must
be the same.
Table consisting of the MST instances (including the CST) and the corresponding
VLAN IDs associated with each of them.
This table consists of the VLAN identifier (VID) and the corresponding filtering identifier
(FID) associated with each VID.
Table consisting of the FIDs and the corresponding VLAN IDs associated with each of
them.
D-Link Unified Access System
Configuring Spanning Tree Protocol Page 247