Figure 232: Policy Configuration; Figure 233: Policy Configuration; Table 209: Policy Configuration Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Figure 232 shows the Policy Configuration page when the Policy Selector option is Create.
Figure 233 shows the Policy Configuration page when the Policy Selector option shows a configured policy that has a
member class. To configure a member class, see
Field
Policy Selector
Policy Name
Policy Type
Available Class List
Document 34CSFP6XXUWS-SWUM100-D7

Figure 232: Policy Configuration

"Class Configuration" on page

Figure 233: Policy Configuration

Table 209: Policy Configuration Fields

Description
To create a new policy, select Create from the menu; another page appears to
facilitate creation of a new policy. To change a policy name or to modify the class list
members, select the policy name from the menu. To delete an existing policy select it
from the menu, and then click Delete.
If you select Create from the Policy Selector menu, enter a name to associate with the
class(es). The name is a case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying a policy. To modify the name of an existing policy, select it from
the Policy Selector menu and enter a new name in the Policy Name field, and then
click Rename.
The available policy type is In , which indicates the type is specific to inbound traffic.
Out indicates the type is specific to outbound traffic direction. This field is only
configurable when you create a new policy. After policy creation, this becomes a non-
configurable field displaying the configured policy type.
The menu lists all existing DiffServ class names. The list is automatically updated as
a new class is added or removed from the policy. To associate a DiffServ class with a
policy, select the name of the class from the list, and then click Add Selected Class.
D-Link Unified Access System
328.
Configuring Differentiated Services Page 331