Figure 263: Cp Activation And Activity Status; Table 233: Cp Activation And Activity Status - D-Link DWS-4026 User Manual

D-Link Unified Access System
The CP Activation and Activity Status page has a drop-down menu that contains all captive portals configured on the
switch. When you select a captive portal, the activation and activity status for that portal displays.
Table 233 describes the information that displays for each portal.
Field Description
Operational Status Indicates whether the captive portal is enabled or disabled.
Disable Reason If the captive portal is disabled, then this field indicates the reason. The portal instance may be
disabled for the following reasons:
• None - CP is enabled.
• Administratively Disabled
• RADIUS Authentication mode enabled, but RADIUS server is not defined.
• Not associated with any interfaces.
• The associated interfaces do not exist or do not support the CP capability.
Blocked Status Indicates whether authentication attempts to the captive portal are currently blocked.
Use the Block and Unblock buttons to control the blocked status. If the CP is blocked, users
cannot gain access to the network through the CP. Use this function to temporarily protect the
network during unexpected events, such as denial of service attacks.
Block and Unblock are only available when the CP operational status is Enabled. The blocked
status is an operational parameter and does not persist across switch reboot even if the switch
configuration is saved before a reboot.
Authenticated Shows the number of users that successfully authenticated to this captive portal and are currently
Users using the portal.
The following buttons are available on the CP Activation and Activity page:
• Block—Click Block to prevent users from gaining access to the network through the selected captive portal.
• Unblock—If the Blocked Status of the selected captive portal is Blocked, click Unblock to allow access to the network
through the captive portal.
• Refresh—Click Refresh to update the screen with the most current information.
Page 376 Captive Portal Configuration

Figure 263: CP Activation and Activity Status

Table 233: CP Activation and Activity Status

Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09