Using The Web Interface - D-Link DWS-4026 User Manual

D-Link Unified Access System
U W I
SING THE EB NTERFACE
To access the switch by using a Web browser, the browser must meet the following software requirements:
• HTML version 4.0, or later
• HTTP version 1.1, or later
• JavaScript™ version 1.5, or later
Use the following procedures to log on to the Web Interface:
The switch web UI supports Internet Explorer v6 and v7. Appropriate display of the web pages is not
guaranteed for other web browsers.
1 Open a Web browser and enter the IP address of the switch in the Web browser address field.
2 Type the user name and password into the fields on the login screen, and then click Login.
The user name and password are the same as those you use to log on to the command-line interface. By default, the
user name is admin , and there is no password. Passwords are case sensitive.
3 After the system authenticates you, the System Description page displays.
Figure 1 shows the layout of the D-Link software Web interface. Each Web page contains three main areas: device view,
the navigation tree, and the configuration status and options.
Page 48 Understanding the User Interfaces
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09