D-Link Unified Access System
U
A
SER
CCOUNTS
By default, the switch contains two user accounts:
•
admin, with 'Read/Write' privileges
•
guest, with 'Read Only' privileges
Both of these accounts have blank passwords by default. The names are not case sensitive.
If you log on to the switch with the user account that Read/Write privileges (i.e., as admin), you can use the User Accounts
page to assign passwords and set security parameters for the default accounts. You can also add up to five read-only
accounts. You can delete all accounts except for the Read/Write account.
Only a user with Read/Write privileges may alter data on this screen, and only one account can exist with
Read/Write privileges.
To access the User Accounts page, click LAN > Administration > User Accounts in the navigation tree.
Field
User
Page 70
User Accounts
Figure 20: User Accounts
Table 13: User Accounts Fields
Description
From the User menu, select an existing user to configure, or select Create to create a
new user account. The system can have a maximum of five 'Read Only' accounts and
one Read/Write account.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09