Upload File From Switch (Tftp); Figure 77: Upload File From Switch; Table 63: Upload File From Switch Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
U F F
PLOAD ILE ROM
Use the Upload File from Switch page to upload configuration (ASCII) and image (binary) files from the switch to the TFTP
server.
To display the Upload File from Switch page, click Tool > Upload File in the navigation tree.
Field
File Type
Image Name
TFTP Server Address Type
TFTP Server Address
TFTP File Path
TFTP File Name
Start File Transfer
Document 34CSFP6XXUWS-SWUM100-D7
S (TFTP)
WITCH

Figure 77: Upload File from Switch

Table 63: Upload File from Switch Fields

Description
Specify what type of file you want to upload:
• CLI Banner: Retrieves the CLI banner file.
• Code: Retrieves a stored code image.
• Configuration: Retrieve the stored startup configuration (.cfg) and copy it to a TFTP
server.
• Text Configuration: Retrieves the text configuration file startup-config.
• Error Log: Retrieves the system error (persistent) log, sometimes referred to as the
event log.
• Buffered Log: Retrieves the system buffered (in-memory) log.
• Trap Log: Retrieves the system trap records.
Specify the code image to upload, either image1 or image2. This field is only visible
when Code is selected as the File Type. The factory default is image1.
Specify either IPv4 or IPv6 address to indicate the format of the TFTP Server Address
field. The factory default is IPv4.
Enter the IP address of the TFTP server in accordance with the format indicated by the
TFTP Server Address Type. The factory default is the IPv4 address 0.0.0.0.
Enter the path on the TFTP server where you want to put the file. You may enter up to
32 characters. The factory default is blank.
Enter a destination file name for the file to upload. You may enter up to 32 characters.
The factory default is blank.
To initiate the file upload, check this box before clicking Submit.
D-Link Unified Access System
Using System Utilities Page 145