D-Link Unified Access System
Field
Broadcast Poll Interval
Unicast Poll Timeout
Unicast Poll Retry
•
If you change any of the settings on the page, click Submit to apply the changes to system.
Page 168
Configuring SNTP Settings
Table 80: SNTP Global Configuration Fields (Cont.)
Description
Specifies the number of seconds between broadcast poll requests expressed as a
power of two when configured in broadcast mode. Broadcasts received prior to the
expiry of this interval are discarded. Allowed range is (6 to 10). Default value is 6.
Specifies the number of seconds to wait for an SNTP response when configured in
unicast mode. Allowed range is (1 to 30). Default value is 5.
Specifies the number of times to retry a request to an SNTP server after the first time-
out before attempting to use the next configured server when configured in unicast
mode. Allowed range is (0 to 10). Default value is 1.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09