Viewing Managed Access Point Radio Summary Information; Viewing Detailed Managed Access Point Radio Information; Table 284: Managed Ap Radio Summary; Table 285: Managed Ap Radio Detail - D-Link DWS-4026 User Manual

D-Link Unified Access System

Viewing Managed Access Point Radio Summary Information

You can view general information about each operational radio on all APs managed by the switch. The Managed Access
Point Radio Summary page shows the channel, transmit power, and number of associated wireless clients for all managed
APs. For more information about a specific radio on an AP, click the radio.
Table 284 describes the fields you see on the Radio Summary page for the managed access point status.
Field
MAC Address
Location
Radio
Channel
Transmit Power
Authenticated Clients

Viewing Detailed Managed Access Point Radio Information

You can view detailed information about each radio on the APs that the Unified Switch manages on the Radio Detail page
for the managed access point radio status. Use the options above the table to select the AP and radio with the settings to
view. The AP is identified by its MAC address and location. The radio is identified by its number and configured mode. If the
radio is disabled, the radio mode will be displayed as Off.
for the managed access point status.
Field
Supported Channels
Channel
Channel Bandwidth
Fixed Channel Indicator This flag indicates if a fixed channel is configured and assigned to the radio, a fixed channel
Manual Channel
Adjustment Status
WLAN Utilization
Page 466 Monitoring Status and Statistics

Table 284: Managed AP Radio Summary

Description
The Ethernet address of the Unified Switch managed AP. If the MAC address of the AP is
followed by an asterisk (*), it is managed by a peer switch.
A location description for the AP, this is the value configured in the valid AP database (either
locally or on the RADIUS server).
Indicates the radio interface and configured mode of the radio, if the radio is disabled the radio
mode will be displayed as Off instead of showing the configured mode.
If radio is operational, the current operating channel for the radio.
If radio is operational, the current transmit power for the radio.
Total count of clients authenticated by the AP on the physical radio. This is a sum of all the
clients authenticated by each VAP enabled on the radio.

Table 285: Managed AP Radio Detail

Description
The list of eligible channels the AP reported to the switch for channel assignment. The list is
based on country code, hardware capabilities, and any configured channel limitations.
If radio is operational, the current operating channel for the radio.
Indicates whether the channel bandwidth is 20 MHz or 40 MHz.
can be configured in the valid AP database (locally or on a RADIUS server).
Indicates the current state of a manual request to change the channel on this radio. The valid
values are:
• Not Started: No request has been made to change the channel.
• Requested: A channel change has been requested by the user but has not been processed
by the switch.
• In Progress: The switch is processing a channel change request for this radio.
• Success: A channel change request is complete.
• Failure: A channel change request failed.
Total network utilization for the physical radio. This value is based on radio statistics.
Table 285 describes the fields you see on the Radio Detail page
Document 34CSFP6XXUWS-SWUM100-D7
Software User Manual
12/10/09