D-Link DWS-4026 User Manual page 46

D-Link Unified Access System
network parms 192.168.2.23 255.255.255.0 192.168.2.1
- To manually configure the IPv6 address, subnet mask, and (optionally) default gateway, enter:
network ipv6 address <address>/<prefix-length> [eui64]
network ipv6 gateway <gateway>
To view the network information, enter show network.
7 To save these changes so they are retained during a switch reset, enter the following command:
copy system:running-config nvram:startup-config
or use the command write memory.
After the switch is connected to the network, you can use the IP address for remote access to the switch by using a Web
browser or through telnet or SSH.
Page 46 Connecting the Switch to the Network
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09