Global Configuration And Status; Figure 136: Igmp Snooping Global Configuration And Status; Table 119: Igmp Snooping Global Configuration And Status Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
G C
LOBAL ONFIGURATION AND
Use the IGMP Snooping Global Configuration and Status page to enable IGMP snooping on the switch and view information
about the current IGMP configuration.
To access the IGMP Snooping Configuration and Status page, click LAN > L2 Features > IGMP Snooping > Configuration
and Status in the navigation tree.

Table 119: IGMP Snooping Global Configuration and Status Fields

Field
Admin Mode
Multicast Control Frame Count Shows the number of multicast control frames that have been processed by the CPU.
Interfaces Enabled for IGMP
Snooping
Data Frames Forwarded by the
CPU
VLAN Ids Enabled For IGMP
Snooping
• Select Enable or Disable the Admin Mode field and click Submit to turn the feature on or off. Perform a save if you
want the changes to remain in effect over a power cycle.
Document 34CSFP6XXUWS-SWUM100-D7
S
TATUS

Figure 136: IGMP Snooping Global Configuration and Status

Description
Select the administrative mode for IGMP Snooping for the switch from the pulldown
menu. The default is disable.
Lists the interfaces currently enabled for IGMP Snooping. To enable interfaces for
IGMP snooping, see
Shows the number of data frames forwarded by the CPU.
Displays VLAN Ids enabled for IGMP snooping. To enable VLANs for IGMP snooping,
see "Multicast Router Status" on page
D-Link Unified Access System
"Interface Configuration" on page
219.
216.
Configuring IGMP Snooping Page 215