Figure 337: Rf Scan Ap Details; Table 313: Rf Scan Buttons - D-Link DWS-4026 User Manual

D-Link Unified Access System
Button
Delete All
Manage
Acknowledge
Acknowledge All
Rogues
Refresh
After you click the MAC address of an AP to view details, the detailed Access Point RF Scan Status page for the AP
appears.
The detailed status for access points detected during the RF scan shows information about an individual AP detected
through the RF scan. To view information about another AP detected through the RF Scan, return to the main Rogue/RF
Scan page and click the MAC address of the AP with the information to view.
Table 314 shows the information the Access Point RF Scan Status page shows for an individual access point.
Page 490 Monitoring and Managing Intrusion Detection

Table 313: RF Scan Buttons

Clears all APs from the RF scan list. The list repopulates as the APs are discovered.
To configure a Rogue AP to be managed by the switch the next time it is discovered, select
the check box next to the MAC address of a detected AP and click Manage.
The switch adds the AP to the Valid AP database as a Managed AP and assigns it the default
AP profile. Then, you can use the switch to configure the AP settings. If you use a RADIUS
server for AP validation, you must add the MAC address of the AP to the AP database on the
RADIUS server.
To clear the rogue status of an AP in the RF Scan database, select the check box next to the
MAC address of the AP and click Acknowledge.
To acknowledge all APs with a Rogue status, click Acknowledge All Rogues. The status of
an acknowledged rogue is returned to the status it had when it was first detected. If the
detected AP fails any of the tests that classify it as a threat, it will be listed as a Rogue again.
Update the page with the current data.

Figure 337: RF Scan AP Details

Software User Manual
Description
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09