Best Routes Table; Figure 209: Best Routes Table; Table 190: Best Routes Table Fields - D-Link DWS-4026 User Manual

D-Link Unified Access System
B R T
EST OUTES ABLE
The route table manager collects routes from multiple sources: static routes, RIP routes, and local routes. The route table
manager may learn multiple routes to the same destination from multiple sources. In that case, the route table manager
selects the route with the lowest route preference value to use for forwarding to that destination. Use the Best Routes Table
page to display the best routes from the routing table. To view all routes, including multiple routes to the same destination,
see "Route Table" on page
To display the page, click LAN > L3 Features > Router > Best Routes Table in the navigation tree.
Field
Total Number of Routes
Network Address
Subnet Mask
Protocol
Next Hop Slot/Port
Next Hop IP Address
• Click Refresh to update the information on the screen.
Page 304 Router
302.

Figure 209: Best Routes Table

Table 190: Best Routes Table Fields

Description
The total number of routes in the route table.
The IP route prefix for the destination.
Also referred to as the subnet/network mask, this indicates the portion of the IP
interface address that identifies the attached network.
This field tells which protocol created the specified route. The possibilities are one of
the following:
• Local
• Static
• Default
• RIP
The outgoing router interface to use when forwarding traffic to the destination.
The outgoing router IP address to use when forwarding traffic to the next router (if any)
in the path towards the destination. The next router is always one of the adjacent
neighbors or the IP address of the local interface for a directly attached network.
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09