Figure 22: Authentication List Configuration; Table 14: Authentication List Configuration Fields; Table 15: Authentication Profile Fields - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Field
Authentication List
Authentication List Name
Figure 22 shows the fields on the Authentication Profiles page when you select an existing authentication list, such as the
defaultList.
Field
Authentication List
Method 1
Method 2
Method 3
Document 34CSFP6XXUWS-SWUM100-D7

Table 14: Authentication List Configuration Fields

Description
The menu allows you to create a new authentication list or to select an existing list to
view or configure.
To create a new login list, enter the name you want to assign. The name can be up to
15 alphanumeric characters long and is not case sensitive.

Figure 22: Authentication List Configuration

Table 15: Authentication Profile Fields

Description
The menu allows you to create a new authentication list or to select an existing list to
view or configure.
Use the menu to select the method that should appear first in the selected
authentication login list. User authentication occurs in the order the methods are
selected. Possible methods are as follows:
• local: The user's locally stored ID and password will be used for authentication Since
the local method does not time out, if you select this option as the first method, no
other method will be tried, even if you have specified more than one method.
• radius: The user's ID and password will be authenticated using the RADIUS server.
If you select RADIUS or TACACS+ as the first method and an error occurs during the
authentication, the switch uses Method 2 to authenticate the user.
• tacacs+: The user's ID and password will be authenticated using the TACACS+
server. If you select RADIUS or TACACS+ as the first method and an error occurs
during the authentication, the switch attempts user authentication Method 2.
• reject: The user is never authenticated.
• undefined: The authentication method is unspecified. This option is only available for
Method 2 and Method 3.
Use the menu to select the method, if any, that should appear second in the selected
authentication login list. This is the method that will be used if the first method times
out. If you select a method that does not time out as the second method, the third
method will not be tried.
Use the menu to select the method, if any, that should appear third in the selected
authentication login list.
D-Link Unified Access System
Authentication List Configuration Page 73